Authorized HORL retailer
Design & Grace is an authorized HORL retailer, so you receive genuine HORL equipment backed by the manufacturer's applicable warranty coverage.
HORL
HORL Scissors
$345.00
/
Part number: SCHERE-P
See HORL in our Argyle store- 45° sharpening angle
- Spring-loaded quick-release
- Dynamic blade tension
- Premium stainless knife steel
Couldn't load pickup availability
Authorized USA DealerManufacturer's warranty included
Secure CheckoutSafe, encrypted ordering
Free Shipping on $30 and OverSame-day dispatch before 2pm CST
Price Match & GuidanceNeed help choosing? Contact us
HORL at Design & Grace
HORL Scissors
Black Forest-made stainless steel household scissors with tool-free blade separation and a built-in 45° angle for resharpening with a HORL sharpener
The HORL Scissors are designed around one unusually useful idea: when the blades eventually lose their edge, you can sharpen them yourself. Forged from premium stainless knife steel in the Black Forest, the two scissor halves separate without tools and stand at the correct 45° sharpening angle so the edge can be refreshed with a HORL rolling sharpener.
Why buy here
Why Order from Design & Grace
Ships from Texas
Your HORL Scissors are carefully packed and shipped from our Texas facility.
Made to be maintained
Rather than treating dull scissors as disposable, HORL designed these to come apart, return to a repeatable sharpening angle, and go back into service.
HORL Scissors
Scissors You Can Sharpen at Home
Open the scissors past the resistance point and the spring-loaded quick-release allows the two halves to separate without a screwdriver or adjustment tool. Three integrated contact surfaces position each blade at a stable 45° angle, eliminating the need for the magnetic angle support used when sharpening knives.
HORL recommends the Ceramic honing disc for routine sharpening. The cross-hatch edge can also be refined further with compatible HORL whetstones when you want an even finer finish.
What stands out
Signature Features
45° sharpening angle
Three integrated contact surfaces allow each separated blade to stand at the correct angle for sharpening.
Spring-loaded quick-release
The two halves separate by hand for sharpening and cleaning, with no tools required.
Dynamic blade tension
The spring-loaded joint maintains controlled pressure between the blades so the cutting edges stay in contact along their full length.
Premium stainless knife steel
Hardened stainless blades provide the edge quality and durability needed for repeated sharpening.
HORL cross-hatch grind
The edge geometry helps grip material during the cut rather than pushing it ahead of the blades.
HORL sharpener compatible
Routine sharpening is performed with the Ceramic honing disc on a HORL rolling sharpener.
More than 100 tested materials
HORL developed the scissors for tasks ranging from cardboard and paper to delicate fabrics and other everyday household materials.
Ambidextrous design
The symmetrical handle layout is comfortable for both right- and left-handed use.
Made in the Black Forest
HORL works with regional German manufacturing partners to forge and finish the scissors.
Product details
Specifications
- Brand
- HORL
- Product
- HORL Scissors
- Product Type
- Resharpenable household scissors
- Blade Material
- Hardened stainless knife steel
- Sharpening Angle
- 45°
- Sharpening Position
- Three integrated self-standing contact surfaces
- Recommended Sharpening Disc
- HORL Ceramic honing disc
- Release System
- Spring-loaded quick-release
- Blade Tension
- Dynamic pre-tensioning
- Edge
- HORL cross-hatch grind
- Overall Length
- Approximately 8.5 in
- Blade Length
- Approximately 3.75 in
- Weight
- Approximately 5.5 oz
- Handedness
- Right- or left-handed use
- Country of Origin
- Germany
From Our Founder
"The important feature here isn't simply that these scissors arrive sharp. It's that HORL designed the sharpening angle into the scissors themselves, so maintaining that edge years from now is part of the product rather than an afterthought."
Tony Boulton, Founder, Design & Grace
Good to know
Shipping, care and support
Shipping & Returns
Use & Care
Use for household cutting tasks such as paper, cardboard, fabrics, packaging, foil, and similar materials.
Use the tip for finer work and the section closer to the joint for more demanding cuts.
To separate the blades, open the scissors fully until resistance is felt, then move carefully beyond that point to release the spring-loaded joint.
Place each separated blade on its three integrated contact surfaces for sharpening.
The contact surfaces automatically position the blade at the correct 45° sharpening angle.
For routine sharpening, HORL recommends the Ceramic honing disc.
Secure the blade by hand while sharpening and work the ceramic surface along the bevel for approximately 30 seconds.
Sharpen both blades evenly before reassembling the scissors.
Compatible HORL fine and extra-fine whetstones may be used for additional edge refinement.
Do not cut wire, metal, wood, bone, or other hard materials not intended for household scissors.
Clean and dry the blades thoroughly after use.
Do not leave the scissors wet or exposed to corrosive substances.
Use the tip for finer work and the section closer to the joint for more demanding cuts.
To separate the blades, open the scissors fully until resistance is felt, then move carefully beyond that point to release the spring-loaded joint.
Place each separated blade on its three integrated contact surfaces for sharpening.
The contact surfaces automatically position the blade at the correct 45° sharpening angle.
For routine sharpening, HORL recommends the Ceramic honing disc.
Secure the blade by hand while sharpening and work the ceramic surface along the bevel for approximately 30 seconds.
Sharpen both blades evenly before reassembling the scissors.
Compatible HORL fine and extra-fine whetstones may be used for additional edge refinement.
Do not cut wire, metal, wood, bone, or other hard materials not intended for household scissors.
Clean and dry the blades thoroughly after use.
Do not leave the scissors wet or exposed to corrosive substances.
Warranty Information
HORL products are covered by the manufacturer's applicable statutory liability for defects, with any additional guarantees governed by HORL's current terms. Damage caused by misuse, improper sharpening, or cutting unsuitable materials is excluded.
See HORL's official U.S. terms for current warranty information: https://www.horl.com/en-US/terms-conditions
See HORL's official U.S. terms for current warranty information: https://www.horl.com/en-US/terms-conditions
Add to your order
Complete your HORL sharpening setup
Featured
HORL 3 Ceramic Honing Disc - Smooth
The honing disc that removes the burr after diamond sharpening, and the original replacement for the HORL 3
$49.00
HORL 3 Whetstone – Fine
3000 grit corundum whetstone for refining an already sharpened edge, used dry
$49.00
HORL 3 Whetstone - Extra Fine
6000 grit corundum whetstone for an extra-smooth edge, used dry after the Fine whetstone
$49.00
HORL 3 Kagami Whetstone - Ultra Fine
Ultra-fine polishing disc for a mirror-like edge, the final stage of the HORL 3 system
$79.00
HORL 3 Premium Set
Fine and Extra Fine whetstones plus the HORL Leather, for refining an already sharpened edge
$119.00
Questions answered
Frequently asked questions
How quickly will my order ship?
Orders placed before 2pm CST ship the same day. Delivery typically takes 1–5 business days, depending on your location relative to our Texas warehouse.
Do you offer free shipping?
Yes. Orders of $30 and over ship free anywhere in the United States. Orders under $30 have a standard shipping charge, shown at checkout.
Do you ship outside the United States?
No. We only ship within the United States. Our electrical products, including Jura coffee machines, are 120V models for North America.
Can you ship to a PO Box?
Yes, for smaller orders. These usually ship by USPS and can be delivered to a PO Box. Large items, including Jura coffee machines, ship by UPS and cannot be delivered to a PO Box.
Where do you ship from?
Orders ship from our Argyle warehouse, at our store in Argyle, Texas.
Can I pick up my order in store?
Yes. Choose local pickup at checkout, and your order will usually be ready to collect from our Argyle store within four hours. Please bring a photo ID that matches the name on the order and the card you used to pay.
Can I visit your store?
Yes. Visit us at 308 E FM 1830, STE 3D, Argyle, TX 76226. We're open Monday to Friday from 9:00 AM to 4:00 PM and Saturday from 9:00 AM to 3:00 PM. We're closed on Sunday.
Are you an authorized dealer?
Yes. Design & Grace is an authorized dealer for every brand we sell, so you receive genuine products backed by the manufacturer's warranty.
What warranty is included?
Every product comes with the manufacturer's warranty. Terms vary by brand, and you'll find the details on each product page. You can also contact us if you need help with warranty information.
What is your return policy?
Most items can be returned within 30 days of the ship date for a refund or exchange. Items should be returned in their original condition and packaging, with every part included.
To start a return, email info@designandgrace.com with your order number. Shipping costs are deducted from your refund, and a restocking fee may apply. Some items, including water filters and other consumables, opened hygiene items, and final-sale products, cannot be returned unless they arrive faulty. See our refund policy for the full terms.
What if my order arrives damaged?
Please let us know within 7 days of delivery and include photos of the damage. We'll arrange a replacement, repair or refund at no cost to you.
Can I talk to someone before I buy?
Of course. Call us at (940) 455-2205, email info@designandgrace.com, or send us a message through our Contact Us page. We're happy to help you compare models, choose accessories, or check an order.
Visit us in Argyle
See the full HORL range in our Argyle store
Explore HORL in person at our Argyle, Texas store, where we keep a broad selection on display. Compare sizes, finishes, and models up close, and talk with our team if you would like help choosing the right piece for your kitchen.
Opening hours
- Monday to Friday
- 9:00 AM to 4:00 PM
- Saturday
- 9:00 AM to 3:00 PM
- Sunday
- Closed
